Elektrogerät-Testgerät
Standardprüfsonde B mit einer Kraft von 50 N für IEC 61032 Abbildung 2 und IEC 60529 IP2X
Standard Test Probe B With 50N Force For IEC61032 Figure 2 And IEC 60529 IP2X Product information: This test probe complies with the requirements of Probe B as specified in IEC 61032 and IEC 60529 IP2X. It features an M6 threaded hole at the end of the handle, allowing it to be connected to a force ...
Testsonde A mit integrierter Kraft für IEC61032 IP1X Sicherheitskonformität
Test Probe A with Built-in Force for IEC61032 IP1X Safety Compliance Product information: It conforms to the standard requirements of IEC61032 fig.1, it is required by IEC 60335-1 clause 22.1, IEC60529 IP1X , IEC60065, etc. This probe is intended to verify protection the back of hand of persons ...
Schraublose Prüfvorrichtung zur Prüfung der Anschlussverschlussfähigkeit IEC 60884-1 Ziffer 12.3.11
Screwless Terminal Clamping Capacity Test Apparatus IEC 60884-1 Clause 12.3.11 Product information: This device is designed in compliance with IEC 60884-1:2022 (clauses 12.3.11, 12.3.12, and Figure 14) and IEC 60669-1 clause 12.3.11, etc. It is intended to verify whether screwless terminals can ...
IEC 60335-2-15 Abbildung 109&110 Kesselgriff Festigkeitsprüfung Maschine Mechanische Festigkeitsprüfung
IEC 60335-2-1 Figure 109&110 Kettle Handle Strength Test Machine Mechanical Strength Testing Product Information: Compliance standards and clauses: IEC60335-2-15:2024 "Household and similar electrical appliances-Safety-Part2-15:Particular requirements for heating liquids" clause 21.101 and figure ...
Kaltbiegen-Prüfgerät für Kabel ≤Ø 12,5 mm IEC60811-1-4 Nummern 8.1 und 8.2
Cold Bend Test Apparatus For Cables ≤Ø 12.5mm IEC60811-1-4 Clause 8.1 And 8.2 Product description: This device is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. According to the standard ...
IEC 60335-1 Anhang G 20 mm Dicke Matte Schwarz lackierte Holzplatte 500 × 500 mM
IEC 60335-1 Annex G 20mm Thick Matte Black Painted Wooden Board 500×500 MM Product Overview: This Matte Black Painted Wooden Board is specifically designed for use in electrical safety testing environments, conforming to the requirements of IEC 60335-1 Annex G Clause 7 and IEC 61558-1:2017 Clause 15...
IEC 60335-2-3 Drei-Punkte-Metallunterstützung für elektrische Eisen-Temperatursteigerungen
IEC 60335-2-3 Three-Point Metallic Support for Corded Electric Iron Temperature Rise Product Information: Designed specifically for safety and performance testing, this Three-Point Metallic Support Stand is built in full compliance with IEC 60335-2-3 Clause 11.2, making it ideal for temperature rise ...
IEC 60335 Toaster Testsystem 500 automatische Zyklen für die Sicherheit und Zuverlässigkeit von Geräten
IEC 60335 Toaster Test System 500 Automatic Cycles for Appliance Safety & Reliability Product information: The test appliance conforms to IEC60335-2-9: 2016 “Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking ...
Schwarze Box-Kammer Temperaturanstiegstest-Ecke für die Sicherheit von elektrischen Produkten IEC 60335-1
Black Box Chamber Temperature Rise Test Corner for Electrical Product Safety IEC 60335-1 Product information: This test corner conforms to the standard requirement of IEC 60335-1 clause 11.2, IEC60065 clause 7, etc. It is designed and manufactured to provide the required environment for the ...
IEC 60335-1 Staubsauger Schläuche Stromträger Schläuche Biegeprüfvorrichtung 5 Station
IEC60335-1 Vacuum Cleaner Hoses Current-Carrying Hoses Flexing Test Device 5 Station Product information: This device meets the standard of IEC60335-1:2004,IEC60335-2-2:2009,IEC60312-1:2010.It is used to assess the mechanical performance of vacuum cleaner hoses under left and right flexing.The ...
IEC 60065 Φ800mm Stahlgeschrägplatten-Mechanische Stabilitätsprüfbank mit Knopfkontrolle
IEC 60065 Φ800mm Steel Inclined Plane Button-Controlled Mechanical Stability Test Bench Overview: This Φ800mm Steel Inclined Plane Test Bench is designed in accordance with IEC 60335-1 Clause 20.1, IEC 60950:2013 Clause 4.1, and IEC 60065:2014 Clause 19.1. It is specially developed for testing the ...
IEC60335-1 Präzisions-Bindungstester für die Bodenbindung Ausgangsstrombereich 2-40A
IEC60335-1 Precision Ground Bond Tester Output Current Range 2-40A Product information: The Precision Ground Bond Tester offer a variety of combined testing functions with advantages such as high accuracy and high-speed testing. Customized solutions can be provided according to user requirements to ...
Umfassende Prüfmaschine mechanischer Festigkeit Iecs 60335-2-84 für Toilette Seat
IEC 60335-2-84 Comprehensive Mechanical Strength Testing Machine For Toilet Seat Standard For Comprehensive Mechanical Strength Testing Machine: IEC 60335-2-84 "Household and similar electrical appliances. Safety. Part 2-84: Particular requirements for toilets" JC/764-2008 "Toilet Seat and Cover" ...
IEC60335-2-24 Haushaltsgerät kühlte Tür-Zuverlässigkeitsprobe-Maschine
IEC60335-2-24 Household Appliance Refrigerated Door Endurance Test Machine Product Information For Refrigerated Door Endurance Test Machine: Standard:IEC60335-2-24:2017 “Household and similar electrical appliances-Safety-Part2-24: Particular requirements for refrigerating appliances, ice-cream ...
Kessel-Eisen-Mischmaschinen Iecs 60335-2 stehen drahtlose und zurückgezogene Ausdauer-Prüfeinrichtung
IEC 60335-2 Cordless Kettle Irons Blenders Stand and Withdrawn Endurance Test Apparatus Standards For Cordless Kettle Irons Blenders Stand and Withdrawn Endurance Test Apparatus: The Cordless Kettle Irons Blenders Stand and Withdrawn Endurance Test Apparatus conforms to the standard requirements of ...
Druckprüfungen-System-Rechenoperation 2.5Mpa Iecs 60335-2-21 hydrostatische
IEC 60335-2-21 2.5Mpa Hydrostatic Pressure Test System for Water Heaters Product overview: This hydraulic pressure test apparatus is required by IEC 60335-2-5 cl.22.101,IEC 60335-2-7 cl.22.101 , IEC 60335-2-21/35 22.47 & 22.103 , IEC 60335-2-24 cl.22.7, etc. It is used for various pressure-bearing ...
Haushalts-Elektrogerät-Mikrowelle Oven Door Endurance Tester Iecs 60335-2
IEC 60335-2 Household Electrical Appliances Microwave Oven Door Endurance Tester Standard For Microwave Oven Door Endurance Tester: IEC 60335-2-25 household and similar electrical appliances – safety: part 2-25:particular requirements for microwave ovens, including combination microwave ovens, ...
Elektrischer Hammer-Haltbarkeits-Schlagversuch-Ausrüstung Iecs 60745 für Handmotor
IEC 60745 Electric Hammer Durability Impact Test Equipment For Hand Held Motor Product Information: This electrical hammer durability impact test equipment conforms to IEC 60745-2-1 clause 17 and IEC 60745-2-6 clause 17 and figure 103. This apparatus is applicable to durability test for hand held ...
Sturz-Waschmaschinen-Tür-Ausdauer-Testgerät Iecs 60335-2-7
IEC 60335-2-7 Tumble Washing Machine Door Endurance Testing Equipment Standards For Tumble Washing Machine Door Endurance Testing Equipment: Standard: IEC60335-2-7:2016 “Household and similar electrical appliances-Safety-Part2-7:Particular requirements for washing machines” clause 18.101 and 22.104. ...
IEC 62552 2015 Haltbarkeitsprüfer für Kühlschranktürschalter
IEC 62552:2015 Refrigerator Door Switch Durability Tester Product Information: The Refrigerator Door Switch Durability Tester is designed and manufactured in accordance with IEC 62552:2015 Chapter 10 and customized customer requirements. It is used for the durability testing of vertical doors on ...
Zwei Stationen Waschmaschine Tür Haltbarkeit Tester IEC60335-2-4
Two Station Washing Machine Door Durability Tester IEC60335-2-4 Product Information: The washing machine door durability tester complies with IEC60335-2-11:2008 Clause 20.101, IEC60335-2-7:2016 Clauses 18 and 22.104, and IEC60335-2-4:2017 Clause 18. It’s Used for durability and life testing of the ...
Testsonde für den Erwachsenenarm gemäß IEC 62841-4-6 2022 Abbildung 105 für die Sicherheitsbewertung
Adult Arm Test Probe According to IEC 62841-4-6:2022 Figure 105 for Safety Evaluation Product information: The Young Adult Arm Test Probe simulates how a product interacts with a young adult’s arm, helping designers, engineers, and researchers evaluate key factors such as comfort, usability, and ...
IEC 61855 Abbildung 13-14 Haargelenker Spannungs-Einheitlichkeitstester mit Grafik
IEC 61855 Figure 13-14 Hair Straightener Tension Uniformity Tester with graph illustrated Product Information: Standard: Conform to IEC 61855 clause 5.8, figure 13 and 14. Specimen and restrictions: Hair straightener. Test purpose: Used to detect the tension uniformity of the hair straightener. Test ...
IEC 62841-4-6 2022 Abbildung 104 Jüngerer Erwachsener Arm Testsonde Simulieren junger Arm
IEC 62841-4-6:2022 figure 104 Young Adult Arm Test Probe Simulate Young Arm Product information: The Young Adult Arm Test Probe is used to simulate the way a product interacts with a young adult's arm. This allows designers, engineers, and researchers to assess various aspects of the product, ...
